Disclaimer: All the logos and artwork belong to their respective brand. we don’t take responsibility for any of the logos shown in the images. The images are just for representation purposes.
Optional
Pretreatment Flame/Corona/Plasma
| Corona treatment | Plasma treatment | Flame treatment |
| Corona treatment (sometimes referred to as air plasma) is a surface modification technique that uses a low-temperature corona discharge plasma to impart changes in the properties of a surface. | Plasma is a partially-ionized gas, in which the degree of ionization fluctuates and may sometimes be very low | Flame treatment is the application of a gas flame to the surface of a material to improve adhesion. |
Screen Printing is possible in 1/2/3 colors (Optional)
The images are for presentation purpose. We don’t have any right on it & we don’t take charge of it.
Infrared Drying and UV curing (Optional)
| Infrared drying | UV curing |
| Infrared heating or drying involves a heat transfer by radiation between a hot element and a material at a lower temperature that needs to be heated or dried. The peak wavelength of the radiation is dependant on the temperature of the heated element | UV curing is the process by which ultraviolet light is used to initiate a photochemical reaction that generates a crosslinked network of polymers. Read More |
Fast Printing (Instant drying)
RUCO UV inks
Fast curable RUCO UV inks which get cured under UV radiation in <1 sec.
Printed components are need not to be stacked
Good Contrast
RUCO UV inks
Whether it is dark/light Surface contrast of RUCO UV inks are very good & opaque.
Good Adhesion
RUCO UV inks
Adhesion on powder-coated surface is very easy with RUCO UV inks which is UV cured(Weather resistant)
Printing of Bar-code is sharp & crisp
Printing must be very crisp and sharp & barcode must be readable
On the curve part, the printed 1 D barcode has to be read and its grade is needed to be defined between A, B & C
Rotary Pad printing
Ink is applied on an engraved roller which is cleaned by a blade to trap the ink inside which is subsequently picked up by a rubber roller. This rubber roller comes into contact with Filter to deliver the print. A rotary printing system where the speed could go up to 2000/hr.
Traceability
According to the Traceability aspect, RUCO UV inks are one of the best inks for these applications
Extremely shiny and smooth printing
No waste
RUCO UV inks are 1 or 2 color component inks. Each and every drop of inks are utilized for printing
Laser Marking Machine
Laser Marker, Laser Paint remover for Serialization and unique code identification. Logo engraver for All metals on 2D and 3D surface Rotary Laser Marking with rotary attachment.
Disclaimer: All the logos and artwork belong to their respective brand. we don’t take responsibility for any of the logos shown in the images. The images are just for representation purposes.
