Disclaimer: All the logos and artwork belong to their respective brand. we don’t take responsibility for any of the logos shown in the images. The images are just for representation purposes.
We are RUCO INKS Partner in India, Nepal, Bangladesh, UAE, Srilanka
Our inks should focus not only on being free from heavy metals (ROHS) like Lead (Pb), Arsenic, Chromium, etc. but also from Nitrobenzene, BPA, VOC (Volatile Organic Chemicals), PAC, Naphthalene.
Non-Toxic, Low Migration Options, Vibrant and Intense Colors, Mono Pigment Systems, Local stock and quick impact, Local Color Matching.
For Toys, Medical, Cosmetics, further regulations apply.
MARKOLASER is a Leading Brand of Laser Systems exports to Switzerland, the US, UAE, Tunisia, etc All machines are made with high-quality components, made according to the specifications of Markolaser, keeping safety in mind. The group is 35 years old
Constellation of Laser Machines
Printing on Spouts/ Handle
Logo engraving & Annealing
Laser engraving or marking on curved parts of faucet without damaging the chrome layer.
Printing on Spouts/ Handles
T-01 + 1294 hardener with pretreatment and post-treatment give very resilient printing solutions.
Normally Both Faucets Are chrome plated. they must pass spray test and the inks should be very hard and chemical resistant
Laser Pretreatment & Pad Printing
Most manufacturers need Red and Blue design on handles to denote hot and cold water respectively
Laser Pretreatment is the New method in which the chrome surface is treated by laser which makes dotted indentation on surface on which red and blue dot are printed
PreTreatment
High Frequency corona Pretreatment
system is recommended for high gloss chrome plated suface
PostTreatment
Infrared Post treatment on machine
Oven cure for 120 C for 60 min
Laser Engraving on bath fittings
| Etching | vs | Annealing |
- Since the chrome plating is very thin or just one micron the etching by any laser can easily remove this coating or plating. this results in failure in salt spray test
- We recommend annealing to black color which is merely on surface without penetration
- Combination of laser etching and annealing
Traceability & Serialization
on back side of faucets
Laser Texturing on metals parts bath fittings
Embedding gems by laser drilling “Swarowski Zironia”
Pad printing and laser marking on Plastic Parts
Laser Printing on Ceramic & Plastic
Disclaimer: All the logos and artwork belong to their respective brand. we don’t take responsibility for any of the logos shown in the images. The images are just for representation purposes.
