JUJO Jelcon Inks

The ink dries at low temperature(80-90 degrees Centigrade).
Ink film is flexible and tough to cope with moulding process.
Heat resistance is excellent and the ink film is suitable to be used in insert moulding and in-mould processing.
Moulding without binder is possible.
As the ink is one-pack type, there will be little loss of the ink
Excellent insulating properties. (resistance: >1013 ohm )
One component type. Fast cure.
Excellent adhesion and flexibility.
Good leveling. Few pin holes appear.
The influence on silver circuits and the increase in resistance are small.
Stable on screen. Printability including reproducibility is good.
Skin irritation is low. Safe to handle.
Excellent printability
As the ink cures at lower temperature than conventional water-based or solvent- based pressure-sensitive adhesive, precision is improved, which leads to better productivity.
As no solvent is contained, viscosity is stable. No clogging occurs. It is easy to wash the stencil.
As the component is 100% non-volatile, the thickness of ink film is stable. It is possible to print thick film.
Excellent adhesion & adhesion-maintaining

Sample Gallery