solvent base

SGL Series Single Component Glass Ink

Characteristics:
SGL Series Ink is produced with the high advance resin, additive ect. In order to have the excellent printing effect, it need to dry by the baking process. SGL Series ink has the good weather-resistance, excellent adhesion, pressing resistance, bending resistance, chemical resistance, high hardness and good sooth layer surface and high gloss.

Application Industries:
Glass products like Refrigerator, Air-Condition, Microwave oven etc.

Applicable Materials:
metal, glass, ceramic, wood, melamine, UPE, ABS, crosslinking PU, and treated PE and PP.

Physical Features:


Sieving capacity: 25T-80T,

Drying conditions:

Tack-free time: natural volatilization 8-15 mins

Hard drying time: 8-15 min at 160-180℃

Thinner: S-2D (slow dry), S-7(fast dry)

Coverage: 15-30? /KG

Technical Data Reference:

Test Item Test Result Test Condition

Ink Degree of Fineness =8 um Hegman Grind Gage

Curing Codition OK 160℃ x 30 min

OK 180℃ x 30 min

Hardness 2H Trirhombohedral Pencil 500g x 45 Degree

Adhesion 100/100 1 mm X 1 mm X100 grids 3M Gummed Paper peel

Note: All the basic colors of SGL Series meet the standard of ROHS, EN-71 and ASTM.

Method of Useage:

(1)Stir well before use, please seal tightly after use; and add 2% XC2-262 and proper qty thinner to stir well; please seal the container tightly after use to prevent the water of the air to reduce the quality of the ink.

(2)If several colors to print requirement, the next color can print after the previous color dry.

(3)If the mesh is blocked, it can clean using the thinner; after the mesh is dry, then begin to print.

(4)It cannot mix with other series ink to use together, otherwise the printing effect will not good.

Notice:

(1)Different material is suitable different ink, the glass substrate surface has various features, the customers should make the test before the bulk printing.

(2)When require the gold or silver color ink, it should mix when using because the color cannot stock for a long time.

(3)To choose the suitable thinner according to the weather and drying speed.

(4)The printed products cannot put as couch together before the printed product dry completely.

(5)The ink should keep in the store far away from the fire or the sunlight directly.

Hazardous Substance:

Class 3 (Flammable)

Safe Handle:

1)Please wear gloves and safety glasses in case of contact with skin and eyes. If ink splashes onto skin or into eyes, rinse immediately with plenty of water, and seek medical advice.

2)Store container in a cool, dry place. Keep away from source of heat, flame and direct sunlight.

3)We strongly recommend that you handle this product according to MSDS.