Mirror like effect ink is a new developed ink, which is composed of special resins and precious metal pigment. The metal flashing is very similar to electroplating effect.
| Code | MLE-290 |
| Appearance | paste |
| Viscosity * | 20-30Pa.s |
| Fineness | < 20 μm |
| Solid Contain | 40(Wt%) |
| Printing Mesh | SUS 350-420 |
| Leveling Time | Room temperature,1-2 mins |
| Drying Time | 100-150℃, 15 mins |
| Sintering Time | 660-700℃/3-5mins (40secs/mm) |
| Screen Tension | >25N (screen tension affects the mirror like effect) |
| Squeegee | Shore hardness:65-75; angle:65-75°; high pressure |
| Acid Test | Deep in 3.7% HCL for 20 mins ,room temperature, no corrosion. |
| Shelf Life | 12 months (5-10℃) |
Remarks:
1.En sure that the printing substrates, screen and environment are clean.
2.Layer segregation might took place during storage. Thinner should be add ed appropriately into the ink and gently stirred until fully mixed before printing.
3.Use the static paper wiping to eliminate static electric ity before printing.
4. Make sure the viscosity of ink is appropriate, because if the ink is too thin will blur the screen.
5. To avoid dust, dry as soon as possible after printing.
6. Store in a cool and dry place, seal tightly after using, far away from high temperature.